Monogram ZFSB25DXSS マニュアル

The slide-out spillproof shelf allows you to
reach items stored behind others. The special
edges are designed to help prevent spills from
dripping to lower shelves.

To remove:

Slide the shelf out until it reaches

the stop, then press down on the tab and slide
the shelf straight out.

To replace or relocate:

Line the shelf up with

the supports and slide it into place. The shelf
can be repositioned when the door is at 90° or
more. To reposition the shelf, slide the shelf
past the stops and angle downward. Slide shelf
down to the desired position, line up with the
supports and slide into place.

NOTE: Make sure you push the shelves all the way
back in before you close the door.

Fresh food
compartment
door bins and
freezer door
tilt-out bins

Large Bins

The larger fresh food compartment door bins
and freezer tilt-out door bins are adjustable.

To remove:

Lift the front of the bin straight

up, then lift up and out.

To replace or relocate:

Engage the back side

of the bin in the molded supports of the door.
Then push down on the front of the bin.
Bin will lock in place.

Small Bins

To remove:

Lift the front of the bin straight

up, then out.

To replace:

Position the bin above the

rectangular molded supports on the door.
Then slide the bin down onto the support
to lock it in place.

The snugger

helps prevent tipping, spilling

or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.

Press tab and pull shelf

forward to remove

Fresh food compartment door bin

Freezer tilt-out bin

Snugger

Shelves and Bins

Stainless Steel Refrigerator

Slide-out
spillproof
shelf

Do not block

Top freezer bin

CAUTION:

Be careful when
placing items in
the top bin. Make
sure that items
do not block or fall
into the ice chute.

MISE EN

GARDE

: Soyez

prudents lorsque
vous placez des
articles dans le bac
supérieur. Assurez-
vous qu’aucun
objet ne bloque
ou tombe dans la
chute à glaçons.