Zephyr CPAE マニュアル

A set of baffle filters are fitted by the factory. These Baffle Filters are intended to filter out residue from cooking. They

need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Reminder function in

the microprocessor will automatically indicate by a 

 flashing when the metal filters need to be cleaned after

every 30 hrs. of use. Filters can be cleaned by hand with non-abrasive soap or in a dishwasher.

When

flashes on display, the baffle filters installed

are required to be cleaned.
This will occur after every 30 hours of use.

Reset the Filter Clean Reminder timer when filters are
cleaned and re-installed (with hood off).

Press and hold 

 for approx. 5 seconds, the display will

appear; hold for approximately 5 seconds until

on

display disappears 

.

The Filter Clean Reminder function is now re-set and a
new 30 hours elapse cycle is initiated.