FiveStar TPN3257 入門ガイド

• Remove shipping screw from each surface burner. 

• Remove each surface burner. 

• Place drip pan in position under each burner. Locate “dimples”. 

• Re-install  surface  burners. 

• Install burner pans. 

• Install burner grates. 
 

STEP 12   (still need picture)

 

• Check for proper ignition: 

−  Push in one control knob and turn 180° counter clock- 

wise to LITE position. 

−  The igniter will spark and the burner will light; the 

igniter will continue sparking until the knob is turned 
from the light position. 

−  First test may require some time, while air is flushed 

out of the gas line. 

−  Turn knob to OFF. 

−  Repeat the procedure for each burner. 
 
• Burner flames should be blue and stable with no 
yellow or yellow tips, excessive noise or lifting of the 
flame from the burner. If any of these conditions exist, 
check that the burner ports are not blocked, and check 
the air mixture. If one of these conditions continues, 
call for service. 
 

 

•  Turn oven thermostat knob counter clockwise to 350°. 

•  The oven burner should light within 60 seconds. 
 

•  Turn griddle thermostat knob counter clockwise to 350°. 

•  The griddle burner should light within 60 seconds. 
 

 
• Turn gas supply “on”. 

• Turn electric supply “on”.