Electrolux EI28BS80KS オーナーマニュアル

Once both doors are in place, ensure they are aligned
with each other and level (please see the “Installation”
section for more details), and replace the top hinge
cover.

CAUTION

Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury,
or damage to the doors or handles.

To remove the refrigerator doors:

1 Trace lightly around the door’s top hinges with a

pencil. This makes reinstallation easier.

2 Disconnect the harness by grasping both sides of

the connector firmly, depress the latch, and pull
apart. Remove the two screws from the top hinge.
Lift the door off of the bottom hinge and set it
aside.

Lower Hinge Removal

3 Unscrew the three lower hinge screws and hinge

if necessary.

Removing the Doors

Getting through narrow spaces

If your refrigerator will not fit through an entrance area,
you can remove the doors. Check first by measuring the
entrance.

To prepare for removing the doors:

1 Make sure the electrical power cord is unplugged

from the wall outlet.

2 Open the freezer drawer and remove the toe

grille (see “Installation” section).

3 Remove any food from the door shelves and

close the doors.

Removing Freezer Drawer

1 Open freezer drawer.

2 Remove drawer screws on right and left sides

(two screws on each side).

3 Lift drawer up and out to remove.

CAUTION

Drawer is heavy. Use caution when lifting.

To reinstall the right door, reverse the above steps.

Rear

Cover

Screw

Ground

Screw

Top

Hinge

Top Hinge

Cover

Hinge

Screws

Multi-wire

Cables

Leave

Hinge

With

Door

Front

Cover Screw

Remove Hex

Head Drawer

Screw

Remove

Hex Head

Drawer

Screw

Do Not Remove

Other Screws

Remove Hex

Head Drawer

Screw

Remove

Hex Head

Drawer

Screw