Verona VCLFSEE365SS インストール手順

5

1.  

2.  AlI openings in the wall behind the appliance and in the floor

under the appliance shall be sealed.

3.  Keep  appliance  area  clear  and  free  from  combustible

materials, gasoline, and other flammable vapors.

4.  Do not obstruct the flow of ventilation air.

5.  Disconnect  the  electrical  supply  to  the  appliance  before

servicing.

6.  When removing appliance for cleaning and/or service;

A.  Disconnect AC power supply.
B.  Carefully remove the range by pulling outward.
 

CAUTION: Range is heavy; use care in handling.

7.

Electrical  installation  should  comply  with  national  and  local

codes.

8.  The misuse of oven door (e.g. stepping, sitting, or leaning on

them) can result in potential hazards and/or injuries.

9.  When installing or removing the range for service, a rolling lift

jack should be used. Do not push against any of the edges of

the range in an attempt to slide it into or out of the installation.

Pushing or pulling a range (rather than using a lift jack) also

increases  the  possibility  of  bending  the  leg  spindles  or  the

internal coupling connectors.

PROPERLY GROUNDED.
If  an  external  electrical  source  is  utilized,  the  installation  must

be  electrically  grounded  in  accordance  with  local  codes  or,  in

the  absence  of  local  codes,  with  the  national  Electrical  Code,

ANSI/NFPA 70.

Only  authorized  replacement  parts  may  be  used  in  performing

service on the range. Replacement parts are available from factory

authorized parts distributors. Contact the nearest parts distributor

in your area.