Verona VCLFSEE365E オーナーマニュアル

22

Before any maintenance is started involving electrical parts of the appliance, it must be

disconnected from the power supply.
•

Let the oven cavity and the broil element cool down;

•

Switch off the electrical supply;

•

Remove the protective cover;

•

Unscrew  and  replace  the  bulb  with  a  new  one  suitable  for  high  temperatures

(300°C- 570°F) having the following specifications: 120V 60 Hz, 15W, E14;

•

Refit the protective cover.

NOTE: Oven bulb replacement is not covered by your guarantee.

The oven door can easily be removed as follows:
•

Open the door to the full extent (fig. 5.12a).

•

Open the lever “

A” completely on the left and right hinges (fig. 5.12b).

•

Hold the door as shown in fig. 5.12.

•

Gently close the door (fig. 5.12c) until left and right hinge levers “

A” are hooked to

part “

B” of the door (fig. 5.12b)

•

Withdraw the hinge hooks from their location following arrow “

C” (fig. 5.12d).

•

Rest the door on a soft surface.

•

To replace the door, repeat the above steps in reverse order.

•

Hold the door firmly (fig. 5.12).

•

Insert  the  hinge  tongues  into  the  slots,  making  sure  that  the  groove  drops  into

place as shown in the fig. 5.13a.

•

Open the door to its full extent.

•

Fully close the levers “

A” on the left and right hinges, as shown in the figure 5.13b.

•

Close the door and check that it is properly in place.

Fig. 5.12

Fig. 5.12a

B

A

Fig. 5.12b

C

A

Fig. 5.12d

Fig. 5.13b

Fig. 5.12c

Fig. 5.13a

Always keep a safe distance from the door

hinges, paying special attention to position

of your hands.

If the door hinges are

not correctly hooked,

they  could  unhook

and  close  suddenly

and

unexpectedly

with risk of injury.