Gaggenau BO451611 使用とお手入れ
20
5
Start with
I
.
The appliance starts.
/
and the temperature appear
in the display. The Sabbath screen will appear as
shown.
shown.
The oven and display lighting is off. The control panel
is blocked and no tone can be heard when you touch
it.
is blocked and no tone can be heard when you touch
it.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to
The display is blank. Set the program selector to
0
.
Switching off:
To cancel the operation, set the program selector to
0
.
Yom Tov mode
With this function, the appliance is programmed to
perform in three stages.
perform in three stages.
Stage 1 and 2 can be programmed for a maximum total
duration of 74 hours. The duration of Step 3 is 1 hour
and cannot be modified.
duration of 74 hours. The duration of Step 3 is 1 hour
and cannot be modified.
Stage 1:
maintains a warm temperature of 122° F
(50°C) in the convection heating function. The interior
oven lights remain off through this stage.
oven lights remain off through this stage.
Stage 2:
the appliance raises to a desired temperature
setting and maintains a temperature between 120 and
450° F (50 -230°C). For warming and cooking foods
in the convection heating function. The desired time
can be adjusted for this stage. The interior oven lights
will be on during this time.
450° F (50 -230°C). For warming and cooking foods
in the convection heating function. The desired time
can be adjusted for this stage. The interior oven lights
will be on during this time.
Stage 3:
maintains a warm temperature of 122° F
(50°C) in the convection heating function for 1 hour
after stage 2 has ended. The interior oven lights will
be on during this time.
after stage 2 has ended. The interior oven lights will
be on during this time.
Note that easily perishable foodstuffs must not be left
in the oven for too long.
in the oven for too long.
Setting the Yom Tov mode
1
Set the program selector to
ž
.
2
Touch the
/
symbol.
The suggested value of 24h at 185° F (85°C)
appears in the display.
appears in the display.
To set Stage 2 cooking time with rotary selector:
1
Touch the
$
symbol to adjust the duration of
Stage 2 cooking time
6
.
2
Set the desired Stage 2 cooking time with the
rotary selector.
rotary selector.
3
Touch the
C
symbol to adjust the end of Stage 2
cooking time
5
.
4
Select the end time with the rotary selector.
5
Change the date if needed by touching the
C
symbol to
V
.
6
Rotate the selector to the desired date.
7
Confirm settings by touching the
™
symbol.
To set Stage 2 temperature:
1
Rotate selector to desired Stage 2 temperature.
2
Start with
I
.
The temperatures of Stage 1 and Stage 2 appear in
the display. The remaining time to the beginning of
Stage 2 is counted down in the display. The Yom Tov
screen will appear as shown.
the display. The remaining time to the beginning of
Stage 2 is counted down in the display. The Yom Tov
screen will appear as shown.
The program will begin with the pre-set warm
temperature without light, then advance to the
programmed temperature with light until the end of
the set date and time, and then maintain the pre-set
warm temperature for 60 minutes.
temperature without light, then advance to the
programmed temperature with light until the end of
the set date and time, and then maintain the pre-set
warm temperature for 60 minutes.
The appliance no longer heats after expiry of the time.
The display is blank. Set the program selector to
The display is blank. Set the program selector to
0
.
Switching off:
To cancel the operation, set the program selector to
0
.
)
6DEEDWKPRGH
)
)
)
Æ