Whirlpool WOD97ES0ES インストール手順

3.   At a 45° angle, align door hinges with slots in the lower  

front of the oven cavity. Slowly insert door, making sure  

you maintain the 45° angle. You will know the door is  

engaged in the slot when you feel a slight drop.

4.   Lower the oven door to the fully open position. If the oven 

door does not open to a full 90°, repeat steps 1 through 3.

5.   Locate the oven door hinge locks in the corners of the oven 

door, and rotate the hinge locks toward the oven cavity to 

the locked position.

   See Step 3 (illustration A) in the “Remove Oven Door(s)”  

section for proper locked position.

6.   Close the oven door.
7.   When the hinges are properly installed and the door closed, 

there should be an even gap between the door and the  

control panel. If one side of the oven door is hanging  

lower than the other, the hinge on that side is not properly 

installed.

The positioning of the oven feet allow a single oven to be 

installed in a cutout height between 26

⁄

16

" and 29

⁄

16

"  

(68.4 cm and 74.8 cm). Refer to the following instructions  

 

to position the feet for the size of your cabinet cutout.

The oven feet do not need to be changed. They are positioned 

correctly as received.

Go to the “Make Electrical Connection” section.