Movincool CLASSICPLUS26 操作ガイド

Check the following items before calling your MovinCool reseller or a qualified 

technician.

If conditions persist after the above actions have been taken, turn the unit off, 

disconnect the power and contact your MovinCool reseller or a qualified 

technician. 

Unit does not operate.

1. Ground fault breaker trip 

or LCDI power cord trip.

Reset breaker or reset power 

cord.

2. Drain tank is full.

(“TANK FULL” LED 

flashes.)

Empty the drain tank.

3. High pressure switch 

activated 10 times in 24 

hours.

1. Clean air filter.
2. Check inlet and outlet air 

to make sure that there 

are no objects preventing 

the air flow into or out from 

the unit.

3. Check environmental 

condition whether it is 

within operation range or 

not.

4. Reset controller.

To RESET: Press FAN HI/

LO and COOL ON/OFF 

buttons simultaneously for 

5 seconds, controller 

returns to normal 

operation.

Insufficient cooling.

1. Dirty/Blocked air filters.

Clean air filter.

2. Air inlet/outlet blocked.

Clean air inlet/outlet.

3. Improper temperature 

setting.

Adjust temperature setting.