MicroFridge 103LMF49TPW オーナーマニュアル

MicroFridge

R

 combination appliances utilize Safe Plug

R

 technology, a revolutionary, patent pending design, 

to conserve electricity and reduce potential fire hazards that can be caused by overloaded circuits.  This 
technology, built into the microwave, works by temporarily shutting off the power to the refrigerator and 
charging outlets when the microwave is in use.  When the microwave is finished, power to the refrigerator 
and charging outlets resumes.  Engineered with unique one-plug-to-the-wall operation, our combination 
appliances never draw more than 11-15 amps of current.

MicroFridge

R

  with Safe Plug

R

  uses patent-pending intelligent load monitoring technology to control the 

microwave, refrigerator and extra outlets.  The two charging outlets are designed to conveniently re-charge 
cell phones, digital cameras, i-Pods, laptops or similar low power devices.

This appliance must be grounded, If there is an 
electrical short circuit, grounding reduces the risk 
of electric shock by providing an escape wire for 
the electric current, This appliance is equipped 
with a cord that has a grounding wire with a 
grounding plug. The plug must be plugged into an 
outlet that is properly installed and grounded. 

Consult a qualified electrician if the grounding 
instructions are not completely understood as to 
whether the appliance is properly grounded. 

A longer cord set or extension cord may be used 
with the following precautions: 

The electrical power cord must be kept dry and 
must not be pinched or crushed in any way. 

•  The marked electrical rating of the cord set 
 

or extension cord should be equal to or 

 

higher than the electrical rating of the 

 

appliance 

•  The extension cord must be a grounding-
 

type 3 wire cord. 

•  A longer cord should be arranged so that 
 

it will not drape over the countertop or 

 

tabletop where it can be pulled on by 

 

children or tripped over accidentally. 

3

Wipe the oven inside and outside with a soft cloth 
and a mild detergent solution. Then rinse and wipe 
dry. This should be done on a weekly basis, more 
often if needed. Never use cleaning powders or 
rough pads. Excessive oil splatters on the inside 
top will be difficult to remove if left for many days.
Wipe splatters with a wet paper towel, especially 
after cooking chicken or bacon.

REMOVABLE PARTS
The following parts may be removed as described.
They should be washed in warm (not hot) water with 
a mild detergent and a soft cloth. Once they are clean,
rinse them well and dry with a soft cloth. Never use 
cleaning powders, steel wool or rough pads.

•The turntable may be cleaned at the sink. Be 
  careful not to chip or scratch the edges as this may 
  cause the turntable to break during use.
•The turntable roller rest should be cleaned regularly.

SPECIAL CARE
For best performance and safety, the inner door panel 
and the oven front frame should be free of food or
grease buildup. Clean them often with a mild detergent.
Then rinse and wipe dry. Never use cleaning powders,  
steel wool or rough pads.

After cleaning the control panel,touch the Clear/Off
pad to clear any entries that might have been entered
accidentally while cleaning the panel.