Electrolux EI36EC45KS オーナーマニュアル

The Cooktop POWER 
key pad enables the 
entire Cooktop.

To power the cooktop, 
touch and hold the 
POWER key pad for 
2 seconds. A beep will 

T h e   C o o k t o p   m a y 
be locked in order to 
prevent the cooktop 
from accidentally being 
turned ON.

To turn ON the Controls 
Lock feature, make sure 
the unit is powered OFF 

Use the WARM key pad 
to activate the Keep 
warm setting for any 
of the elements. First, 
activate the element by 
pressing the ON/OFF 
key pad, then touch 
the WARM key pad 

sound and the Power LED will glow (See Fig. 2). 
The cooktop will be in a ready mode for 10 seconds. 
If no other key pads are touched the Cooktop Main 
POWER will turn OFF automatically.

To turn the Main Power OFF touch Main POWER key. 
A beep will sound and the Power Indicator Light will 
turn OFF (See Fig. 1).

(See Figure 1). Touch and hold the LOCK key pad for 
3 seconds. A beep will sound and the Lock indicator 
light will glow (Fig. 4). Once locked, no other displays 
will glow and no Cooking Zones will activate.

To turn the Controls Lock OFF, touch and hold the 
LOCK key pad for 3 seconds. A beep will sound, 
the Lock indicator light will turn OFF (Fig. 3) and the 
cooktop may be used normally.

located in the Main cooktop controls area. L (low 
heat) should appear in the corresponding element 
display (Fig. 6).

The Minute Timer feature may be useful in the kitchen 
if a recipe calls for keeping track of time. This feature 
will keep track of time from 1 to 99 minutes. The display 
located to the left of the Timer 

 and 

 key pads will 

begin to count down minutes once set.

1.  Set the cooktop timer to the desired time by touching 

the 

 listed over the word “timer”. Touching and 

releasing the 

 or the 

 key pads will increase 

or decrease the Minute Timer setting by 1 minute 
with each key press (up to 99 minutes). You may 
also hold the 

 or 

 key to slew the time to your 

designated time.

2. Once the timer displays the desired amount of 

time, release the key pads. The timer will display 
the time remaining in minutes within the countdown 
process. During the last 60 seconds, the timer will 
countdown in seconds.

  Once the Minute Timer reaches 00 a beep will 

sound every 5 seconds until 

 and 

 key pads 

are touched at the same time and the timer display 
will fl ash “00” indicating that the time is up.

1. Touch the 

 and 

 key pads at the same time or 

touch and hold either the 

 or 

 key pad and scroll 

to 00.

2. If cancelling the Minute Timer using the scrolling 

method, once the Main Control display reaches 
00, release the key pad.

3.  The set time will disappear from the display indicating 

that the Minute Timer is no longer active.