Vinotemp CM150 オーナーマニュアル

ページ / 3
 
CIGAR-MATE 
Using Your New Humidor 
Models: CM-150, CM-300, CM-CIGFT01 
 
Thank you for choosing Cigar-Mate for your cigar storage needs! 
 
**Before using your new humidor, you must follow steps 1 to 3. If you do not follow these 
important steps, your cigars may dry out when placed inside the humidor.** 
 
STEP 1: Calibrating the Hygrometer 
 
Ideally, the humidity range within your new humidor will rest between 65-70%. In order to 
ensure your hygrometer delivers the most accurate reading, you must calibrate your 
hygrometer. Without calibrating, your hygrometer may give off an incorrect reading of +/- 14%.  
 
You will need: 1 zip lock sandwich size plastic bag, 1 measuring spoon or soda cap, salt, and 
water. 
 
1.
 
Place the zip lock bag on a flat surface. 
2.
 
Add about a tablespoons worth of salt to a soda cap or measuring spoon. 
3.
 
Moisten the salt with water – enough to make it damp, but no dissolve. 
4.
 
Carefully place the measuring spoon or soda cap filled with your salt mixture into one 
side of the bag. 
5.
 
Add the hygrometer to the other side of the bag and seal. Allow the two items to rest in 
the sealed bag for 12 hours. After this time, the humidity level within the bag will rise to 
approximately 75.5%.  
6.
 
Take note of any differential between the hygrometer reading and 75.5%. This will be the 
number of percentage points that you must add or subtract for future readings. 
 
Please note: We do not recommend manually adjusting the hygrometer as this may cause 
damage. 
 
STEP 2: Filling the Humidifier 
 
Your new humidor will include one humidifier, pictured below. 
 
View of the top of the humidifier, grates up.