GE GTWS8655DMC オーナーマニュアル

3

„

 Turn off water faucets to minimize leakage if a break or 

rupture should occur. Check the condition of the fill hoses; 

GE recommends changing the hoses every 5 years.

„

 Ensure that the hot water hose is connected to the “H” 

(internal red screened) valve and the cold water hose is 

connected to the “C” (internal blue screened) valve.

„

 Install or store where it will not be exposed to 

temperatures below freezing or exposed to the weather, 

which could cause permanent damage and invalidate the 

warranty.

„

 Properly ground washer to conform with all 

governing codes and ordinances. Follow details  

in Installation Instructions.

„

 This washer does not include water supply hoses.

  GE strongly recommends the use of factory specified 

parts. A list of factory hoses available for purchase are 

listed below. These hoses are manufactured and tested to 

meet GE specifications.

  GE strongly recommends the use of new water supply 

hoses. Hoses degrade over time and need to be replaced 

every 5 years to reduce the risk of hose failures and water 

damage.

Parts and Accessories
Order on-line at GEApplianceparts.com today, 24 hours a 

day or by phone at 800.626.2002 during normal business 

hours.
Part Number 

PM14X10002 

4 ft Rubber Water Supply Hoses

Or
PM14X10005 

4 ft Braided Water Supply Hoses

WX10X10011 Tide

®

 Washing Machine Cleaner*

WX7X1   

Washer Floor Tray

DR07X10002 6’ 

Cable 

DRM2E300V0 

ACM, Splitter, two 6’ Cables & a 1’    

   Cable

* Tide

®

 is a registered trademark of Procter & Gamble

 DO NOT allow children to play on or in this appliance. Close supervision of children is necessary 

when this appliance is used near children. Failure to follow this instruction may result in death 

or injury to persons.

„

 If the lid is opened between cycles (i.e. not pausing and 

restarting the current cycle, changing cycles after it 

started, etc.) pushing the Start button will cause the 

washer to turn on the cold water for 5 seconds followed 

by a 10 second delay before locking the lid and starting 

the cycle.

„

 If the lid is opened during this 15 second period, the word 

PAUSE will start scrolling across its display. You will have 

to push the Start button again to restart the cycle.

Confined 

Space Hazard