Frigidaire FFTR1715LB オーナーマニュアル

6

To ensure proper installation of handles, 

please review these instructions and 

illustrations thoroughly prior to installing the 

handles.
Additionally, before installing the door 

handles, make sure the door swing is 

correct. Your model will have either a 

right hand or left hand door swing. Follow 

instructions in the Use & Care Guide to 

reverse the doors, if necessary.

Stainless steel handles and doors are not 

reversible.

 1.  Place rounded part of handle onto 

shoulder screw on face of door and align 

the two (2) holes in top of handle with 

the two (2) holes in top of door. Do not 

tighten the set screw yet.

 2.  Install the two (2) screws into the top of 

the handle.

 3.  Tighten the set screw on the rounded part 

of the handle until the handle is flush with

the door, then tighten another 1/2 turn.

Wear gloves and use extreme CAUTION 

when installing these handles. The rounded 

end of the handles may be sharp.

To attach metal freezer handle:

 1.  Place rounded part of handle onto 

shoulder screw on face of door and align 

the two (2) holes in bottom of handle 

with the two (2) holes in bottom of door.  

Do not tighten the set screw yet.

 2.  Install the two (2) screws into the 

bottom of the handle.

 3.  Tighten the set screw on the rounded part 

of the handle until the handle is flush with

the door, then tighten another 1/2 turn.