Maytag MMW7730DE オーナーマニュアル

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven is cool. Always follow label instructions on cleaning 
products.

Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

STAINLESS STEEL (on some models)

To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths or abrasive paper towels.

Rub in direction of grain to avoid damage.

■

Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.

■

Vinegar for hard water spots. 

■

Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

Self-Clean cycle:
For optimal door cleaning result, wipe away any deposits with 
a damp sponge before running cycle.

Activate the Control Lock to avoid touch screen activation during 
cleaning. See “Control Lock” section.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Clean cycle:
See “Self-Cleaning Cycle” section first.

■

Self-Clean cycle:
See “Self-Cleaning Cycle” section first. Remove racks, or 
they will discolor and become difficult to slide. If this 
happens, a light coating of vegetable oil applied to the rack 
guides will help them slide.

■

Steel-wool pad

The oven’s light is a standard 25-watt appliance bulb. 

Before replacing, make sure the oven and cooktop are cool and 
the control knobs are off.

1. Disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Reconnect power.

To avoid oven door glass breakage:

■

Do not close the oven door if the racks are not fully inserted 
into the oven cavity or when bakeware extends past the front 
edge of an oven rack.

■

Do not set objects on the glass surface of the oven door.

■

Do not hit glass surfaces with bakeware or other objects.

■

Do not wipe down glass surfaces until the oven has 
completely cooled.

For normal oven use, it is not suggested to remove the oven door. 
However, if removal is necessary, make sure the oven is off and 
cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.