Samsung bd-j7500/za ユーザーズマニュアル

Settings

The Home screen will not appear if 

 

you do not configure the Setup.
The OSD (On Screen Display) may 

 

change in this player after you upgrade 
the software version.
The access steps may differ 

 

depending on the menu you 
selected.
After the Setup process is complete, 

 

you can then operate the panel 
buttons and remote control.

After you have connected the player 

to your TV, turn on the TV and 

player. When you turn on the player 

the first time, the player's Setup 

screen appears on the TV. The Setup 

procedure lets you set the On Screen 

Display (OSD) and menu languages, 

the aspect ratio (screen size), the 

network type, and connect the player 

to your network.
To run the Setup procedure, follow 

these steps:

Plug in the Blu-ray player, turn on 

your TV, and then turn on the Blu-

ray player by pressing the pOWER 

button on the remote. The Setup 

Language screen appears.

Setup I On-Screen Language

Select the desired language, 

and then press the v button. 

The Start screen appears.

Press the 

v button. The TV 

Aspect screen appears. 
On the TV Aspect screen, select 

the desired TV Aspect Ratio, and 
then press the v button. The 

Network screen appears.

✎

An explanation of each Aspect Ratio 

 

■

appears on the screen. Highlight 
each choice to see each explanation. 
If you have an HDTV, we suggest 
you choose 16:9 original.

If you have connected a LAN 

cable to the Blu-ray player, Initial 

Setup defaults to Wired Network. 

Go to the Wired Network section 

below. If you have not connected 

a LAN cable, Initial Setup defaults 

to Wireless Network. Go to the 

Wireless Network section in the 

next column

✎

If you have no network, select Skip 

 

■

by pressing the BLUE (d) button, 

and then go to Step 6.

The Setup Complete window 

appears and remains on the 

screen for a few moments. Then, 

the Home screen appears.

The Blu-ray player automatically 

verifies your wired network.

After the player verifies the 

network, press the v button.
Go to Step 6 of The Setup 

Procedure above.

The Blu-ray player automatically 

searches for and then lists all wireless 
networks that are within range.

Select a network, and then press the 

v button. The keyboard appears.





If your network has a password, use 

the keyboard to enter it. Press the 

number buttons on your remote to 

enter numbers. Use the keyboard to 

enter letters. When finished, use the 

▲▼◀▶ buttons to select Done, and 

then press the v button. 

 

If you have no password, go to Step 4.
After the player verifies the 

network, press the v button.