AT&T CRL82212 マニュアル

Getting started

5

Installation options

Your telephone base is ready for tabletop use. If you want to mount your 
telephone on a wall, use the provided wall mount bracket to connect with 
a standard dual-stud telephone wall mounting plate. If you do not have this 
mounting plate, you can purchase one from many hardware or consumer 
electronics retailers. You might need a professional to install the mounting plate.

Plug the power cord and telephone line into the telephone base. If you 
are using a DSL filter, plug the other end of the telephone line into 
the filter. Route the telephone line cord (or DSL filter) through the wall 
mount bracket hole. 
Position the telephone base, as shown below. Insert the extended tabs 
(see below figure 2) of the wall mount bracket into the slots on the back 
of the telephone base (marked 

B). Push the telephone base down until it is 

securely in place.
Plug the telephone line cord (or DSL filter) into the wall jack. Plug the 
power adapter into a power outlet not controlled by a wall switch.
Align the holes on the wall mount bracket with the standard wall plate 
and slide the wall mount bracket down until it locks securely. Bundle the 
telephone line cord and power adapter cord neatly with twist ties.

1.

2.

3.

4.

Raise the 
antenna