Whirlpool WEC530H0DB インストール手順

This range may be connected directly to the fuse disconnect or 
circuit breaker box. Depending on your electrical supply, make 
the required 3-wire or 4-wire connection.

1. Strip outer covering back 3" (7.6 cm) to expose wires. Strip 

the insulation back 

³⁄₈" (1.0 cm) from the end of each wire.

2. Allow enough slack in the wire to easily attach the wiring 

terminal block.

3. Complete installation following instructions for your type of 

electrical connection:

4-wire (recommended)

3-wire (if 4-wire is not available)

Use this method only if local codes permit connecting ground 
conductor to neutral supply wire.

1. Pull the wires through the conduit on cord/conduit plate on 

bottom of range. Allow enough slack to easily attach the 
wiring to the terminal block.

2. Attach terminal lugs to line 2 (red), bare (green) ground, and 

line 1 (black) wires. Loosen (do not remove) the setscrew on 
the front of the terminal lug and insert exposed wire end 
through bottom of terminal lugs. Securely tighten setscrew to 
torque as shown in the following Bare Wire Torque 
Specifications chart.

3-wire direct

A circuit breaker 
box or fused 
disconnect

3-wire connection:
Direct wire

4-wire direct

A circuit breaker 
box or fused 
disconnect

4-wire connection: 
Direct wire

A

B

C

D

E

F

A

B

C

D

E