VIZIO M43-C1 ユーザーズマニュアル
4
USING THE NETWORK CONNECTION MENU
Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-N.
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is
To connect to a wireless network whose network name (SSID) is
being broadcast:
If your TV is connected to a network with an Ethernet
cable, you will not see the wireless network connection
menu. You must disconnect the Ethernet cable to set
up a wireless network connection.
1. Press the
MENU button on the
remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the
remote to highlight
Network
and press
OK. The NETWORK
menu is displayed.
3. If you do not see your wireless
network displayed, highlight
More Access Points and press
OK. The WIRELESS ACCESS
POINTS menu, which is a list of
available wireless networks, is
displayed.
4. Highlight the name of your
wireless network (this is the
network’s SSID) and press
OK.
5. Using the keyboard on the
remote, enter your network’s
password, then highlight
Connect and press OK.
6. Press the
EXIT button on the remote.
Help
VIZIO
Network
Sleep
Timer
Input
CC
ABC
Audio
Wide
Normal
Picture
Settings
Panoramic
Wide
Zoom
2D
3D
Exit
NETWORK
Wired Connection
Disconnected
Wireless Access Points
More Access Points
WPS
Manual Setup
Hidden Network
Test Connection
WPS
Manual Setup
Hidden Network
Test Connection
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Advanced users can fine-tune the network settings using the Manual
Setup feature.
To change advanced network settings:
1. From the NETWORK menu,
highlight
Manual Setup and
press
OK. The MANUAL SETUP
menu is displayed.
2. To change the settings manually,
use the
Arrow buttons on the
remote to highlight
DHCP and
then use the
Left/Right Arrow
buttons to change the setting to
Off.
3. Use the
Arrow and OK buttons
to adjust each setting:
• IP Address - The IP address
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet
mask.
• Default Gateway - Your
network’s default gateway
address.
• Pref. DNS Server - Your
preferred domain name
server address.
• Alt. DNS Server - Your alternate domain name server
address.
4. Use the
Arrow buttons on the remote to highlight Save and
press
OK.
5. Press the
EXIT button on the remote.
Help
VIZIO
Network
Sleep
Timer
Input
CC
ABC
Audio
Wide
Normal
Picture
Settings
Panoramic
Wide
Zoom
2D
3D
Exit
MANUAL SETUP
DHCP
Off
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Default
Subnet Mask ____.____.____.____
Default
Gateway ____.____.____.____
Pref. DNS
Pref. DNS
Server ____.____.____.____
Alt. DNS
Alt. DNS
Server ____.____.____.____
Wireless MAC 0:0:0:0:0:0
Save
Cancel
Wireless MAC 0:0:0:0:0:0
Save
Cancel
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the
The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
To find the TV's MAC address:
1. From the NETWORK menu, highlight
Manual Setup and press
OK. The MANUAL SETUP menu is displayed.
2. Find the MAC address for the TV at the bottom of the list. The
MAC addresses for the connections in use are displayed:
• RJ45 MAC - The Ethernet or RJ45 MAC address may be
• RJ45 MAC - The Ethernet or RJ45 MAC address may be
needed to set up your network when you have connected
the TV to your network with an Ethernet (Cat 5) cable.
• Wireless MAC - The Wireless (WiFi) MAC address may be
needed to connect your TV to your network with WiFi.
34