Samsung HT-J4100/ZA ユーザーズマニュアル

 - English

R

W

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN 
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with 
only this cable connected. See page 14 in this manual and the section on ARC in your TV's user's manual 
for details.

Two methods of connecting external devices to your home theater are explained below.

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on 
the external analog component.  Select the AUX mode.

 

 Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite 
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical 
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital 
optical cable.  Select the D. IN mode.

 

✎

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

 

✎

This system supports Digital sampling frequencies of 32 kHz or higher from external digital 
components.

 

✎

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not 
supported.

To select an external device after you have connected it, press the 

 button. Each time you press the 

button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM