Samsung HT-J4100/ZA ユーザーズマニュアル

 - English

Settings

 

To listen to the radio, you must connect the 
supplied FM antenna.

1.  Press the 

 button to select FM.

2.  Tune to the desired station.

 

Preset Tuning 1 : Press the 5 button to 

select PRESET, and then press the 

, 

 button to select a preset station.

 

- Before you can tune to preset stations, you 

must add preset stations to the product's 
memory. 

 

Manual Tuning : Press the 5 button to select 
MANUAL, and then press the 

, 

 button to tune in to a lower or higher 

frequency.

 

Automatic Tuning : Press the 5 button to 

select MANUAL, and then press and hold the 

, 

 button for a few seconds 

to automatically search the band.

Press the 

 button. 

 

Each time you press the button, the sound 
switches between STEREO and MONO.

 

In a poor reception area, select MONO for a clear, 

interference-free broadcast.

Example : Presetting FM 89.10 into memory. 
1.  Press the 

 button to select FM.

2.  Press the 

, 

 button to scroll 

the FM frequencies, and then select <89.10>.

3.  Press the 

 button (the yellow 

 button at the bottom of the remote). 

4.  Press the 

 button again 

within about 5 seconds. The station is stored in 
memory.

 

✎

If you press the 

 button 

repeatedly without changing the station, the 
inputted station may be overwritten.

5.  To preset another station, repeat steps 2 to 4. 

 

To tune in to a preset station, press the 

, 

 button.

 

✎

To delete all Preset FM stations at once, press 
the 

 button for about 5 seconds 

in FM Manual mode until DEFAULT PRESET 

appears on the display.

You can record your favorite radio broadcast on a 
USB storage device.
1.  Insert a USB device into the USB jack on the 

front of the product.

2.  Press the 

 button to select FM, and 

then press the 

, 

 button to 

select the station you want to record.

3.  Press the 

 button to start recording. The 

recording process begins.

 

The recorded time is displayed on the left and 
the recording time still available, based on 
the amount of free space in the USB storage 
device, is displayed on the right.

4.  Press the 

 button to finish your recording. 

The recording is stopped and saved as an .mp3 
file at the same time. To play the recorded file, 
refer to "Playing Files on a USB Device".

 

✎

The recorded file is saved in the Tuner folder 
which is created automatically.

 

✎

Only the 

5V 0.5A

 (OPEN/CLOSE), 

5V 0.5A

 (POWER), 

, 

, and 

/

, buttons are operable 

while FM radio is being recorded.

 

✎

If you don't press any buttons while recording, 
the screen saver will be enabled.

 

✎

Sound effects, such as DSP, EQ, etc., are not 
recorded during FM radio recording.

 

✎

The radio is recorded at a set, default volume 
even if you change the volume or press the 

 button during the recording process.

 

✎

If you remove the USB device or Power Cable 
during the recording process, the portion of 
the file which has already been recorded may 
not play back.

 

✎

Recording will not start if the remaining free 
space in the USB storage device is less than 
2MB.

 

✎

If the USB device is removed or has insufficient 
space (under 2MB), the appropriate message 
is displayed and the recording stops.