Samsung HT-J4500/ZA ユーザーズマニュアル

 - English

 

Certain HDMI output resolutions may not work, 
depending on your TV.

 

You must have an HDMI connection to enjoy 
videos with 3D technology.

 

A long HDMI cable may cause screen noise. If this 
occurs, set HDMI Deep Color to Off in the menu.

 

For some 3D discs, to stop a movie during 3D 
playback, press the 5 button once. The movie 

stops and the 3D mode option is de-activated. 
To change a 3D option selection when you are 
playing a 3D movie, press the 5 button once. The 

Blu-ray menu appears. Press the 5 button again, 

then select 3D Settings in the Blu-ray menu.

 

Depending on the content and the position of the 
picture on your TV screen, you may see vertical 
black bars on the left side, right side, or both sides.

 

Depending on the disc type, some aspect ratios 
may not be available.

 

If you select an aspect ratio and option which is 
different than the aspect ratio of your TV screen, 
the picture might appear to be distorted.

 

If you select 16:9 Original, your TV may display 4:3 
Pillarbox (black bars on the sides of the picture).

 

When BD Wise is on, the Resolution setting 

automatically defaults to BD Wise and BD Wise 
appears in the Resolution menu.

 

If the product is connected to a device that does 
not support BD Wise, you cannot use the BD Wise 

function.

 

For proper operation of BD Wise, set the BD Wise 

option in both the product and the TV to On.

 

Be sure to select the correct Digital Output or you 

will hear no sound or just loud noise.

 

If the HDMI device (AV receiver, TV) is not 
compatible with compressed formats (Dolby 
Digital, DTS), the audio signal outputs as PCM.

 

Regular DVDs do not have BONUSVIEW audio and 
Navigation Sound Effects.

 

Some Blu-ray Discs do not have BONUSVIEW audio 
and Navigation Sound Effects.

 

This Digital Output setup does not affect the 

analog (L/R) audio or HDMI audio output to your 
TV. 
It affects the optical and HDMI audio output when 
your product is connected to an AV receiver.

 

If you play MPEG audio soundtracks, the audio 
signal outputs as PCM regardless of your Digital 
Output selections (PCM or Bitstream).

 

Digital Output can be activated when Speaker 
Selection is set to TV Speaker.

 

The Internet connection may be restricted while 
you are using BD-LIVE contents.

 

Depending on your TV, certain HDMI output 
resolutions may not work. Please refer to the user 
manual of your TV.

 

This function is not available if the HDMI cable 
does not support CEC.

 

If your Samsung TV has an Anynet+ logo, then it 
supports the Anynet+ function.

 

In the external memory mode, disc playback may 
be stopped if you disconnect the USB device in the 
middle of playback.

 

Only those USB devices formatted in the FAT file 
system (DOS 8.3 volume label) are supported.  
We recommend you use USB devices that support 
the USB 2.0 protocol with 4 MB/sec or faster 
read/write speeds.

 

The Resume Play function may not work after you 
format the storage device.

 

The total memory available to BD Data 
Management may differ, depending on conditions.

 

When Speaker Selection is set to TV Speaker, audio 

is produced by the TV speakers.

Appendix