Sony SHAKE-99 オーナーマニュアル
model name [SHAKE-99/SHAKE-77/SHAKE-55/SHAKE-33]
[4-487-569-12(1)] GB
38
GB
filename[D:\NORM'S JOB\SONY HA\SO130078\SHAKE-99_77_55_33 (PMRF
01)\4487569121_GB\080ADD.fm]
01)\4487569121_GB\080ADD.fm]
masterpage:Left
“CHILD LOCK” appears when you
press any button on the unit.
press any button on the unit.
• Set the Child Lock function to off
Speakers
Sound comes from only one channel
or the left and right volume is
unbalanced.
or the left and right volume is
unbalanced.
• Place the speakers as symmetrically as
possible.
• Check that the speakers are connected
securely and correctly.
• The source being played back is
monaural.
There is no sound from a specific
speaker.
speaker.
• Check that the speaker is connected
securely and correctly.
Disc player
The disc tray does not open and
“LOCKED” appears in the display
panel.
“LOCKED” appears in the display
panel.
• Consult your nearest Sony dealer or
local authorized Sony service facility.
The disc tray does not close.
• Load the disc correctly.
The disc does not eject.
• You cannot eject the disc during
CD-USB Synchronized Transfer or
REC1 Transfer. Press x to cancel the
transfer, then press Z OPEN/CLOSE
on the unit to eject the disc.
REC1 Transfer. Press x to cancel the
transfer, then press Z OPEN/CLOSE
on the unit to eject the disc.
• Consult your nearest Sony dealer.
Playback does not start.
• Wipe the disc clean (page 42).
• Reload the disc.
• Load a disc that this system can play
• Reload the disc.
• Load a disc that this system can play
• Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
system turned on for a few hours until
the moisture evaporates.
The sound skips.
vibration (e.g., on top of a stable stand).
• Move the speakers away from the unit,
or place them on separate stands. When
you listen to a track with bass sounds at
high volume, the speaker vibration may
cause the sound to skip.
you listen to a track with bass sounds at
high volume, the speaker vibration may
cause the sound to skip.
Playback does not start from the first
track.
track.
• Set the play mode to Normal Play
The folder name, track name, file
name and ID3 tag characters do not
appear properly.
name and ID3 tag characters do not
appear properly.
• The ID3 tag is not Version 1(1.0/1.1) or
Version 2(2.2/2.3).
• The character codes that can be
displayed by this system are as follows:
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
USB device
Transferring results in an error.
• You are using an unsupported USB
• The USB device is not formatted
correctly. Refer to the operating
instructions of the USB device on how
to format.
instructions of the USB device on how
to format.
• Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device off
and on again after removing it from the
system. Then, perform the transfer
again.
power switch, turn the USB device off
and on again after removing it from the
system. Then, perform the transfer
again.