Frigidaire FFHB2740PS オーナーマニュアル

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.

14

  1  Remove handles from carton 

and any other protective 

packaging.

  2  Position fresh food handle 

end over upper and lower 

pre-installed shoulder bolts 

(A) that are fastened into 

door, ensuring the holes for 

the set screws are facing 

towards the opposite door.

 3  While holding handle firmly

against door, fasten upper 

and lower Allen set screws 

(B) with supplied Allen 

wrench.

  4  Repeat steps 2 and 3 to 

install opposite handle. 

Ensure the holes for the set 

screws are facing towards 

the first door.

  5  Position freezer handle end 

over left and right pre-

installed handle mounts that 

are fastened to the door, 

ensuring the holes for the 

set screws are facing down.

 6  While holding handle firmly

against door, loosely tighten 

far right Allen set screw 

(B) with supplied Allen 

wrench until there is no gap 

between handle and door.

 7  Still holding the handle firmly

to the door, firmly tighten far

left Allen set screw (B) with 

supplied Allen wrench.

  8  Return to the far right Allen 

set screw (B) and firmly

tighten with supplied Allen 

wrench.



All set screws should be tightened so the screw is below 

the surface of the handle. The handles should be drawn 

tight to freezer and refrigerator doors with no gaps. 

Opening the opposite door while tightening the Allen 

screw makes installation easier.
The door handle may loosen over time or if it was 

installed improperly. If this happens, tighten the set 

screws on the handles.