Pioneer AVH-X4700BS オーナーマニュアル

7

  Checking part names and functions on page 8

Settings and recorded contents are reset to the factory settings.

This manual uses diagrams of actual screens to describe opera-

tions. However, the screens on some units may not match those 

shown in this manual depending on the model used.

X5700BHS

This indicates model name that are supported 

the described operations.
This indicates to touch an appropriate soft key 

on the touch screen.

This indicates to touch and hold an appropriate 

soft key on the touch screen.

This indicates that there is a reference or 

supplementary for the key or screen.

Slide the tray on the back of the remote control out and insert the 

battery with the plus (+) and minus (–) poles aligned properly.

●

  When using for the first time, pull out the film protruding 

from the tray.

●

  Keep the battery out of the reach of children. Should the 

battery be swallowed, consult a doctor immediately.

●

  Batteries (battery pack or batteries installed) must not be 

exposed to excessive heat such as sunshine, fire or the 
like.

●

  Remove the battery if the remote control is not used for a 

month or longer.

●

  There is a danger of explosion if the battery is incorrectly 

replaced. Replace only with the same or equivalent type.

●

  Do not handle the battery with metallic tools.

●

  Do not store the battery with metallic objects.

●

  If the battery leaks, wipe the remote control completely 

clean and install a new battery.

●

  When disposing of used batteries, comply with 

governmental regulations or environmental public 
institutions’ rules that apply in your country/area.

●

  “Perchlorate Material – special handling may apply.See 

www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable 
to California, U.S.A.)”

Point the remote control in the direction of the front panel to 

operate.

●

  The remote control may not function properly in direct 

sunlight.

●

  Do not store the remote control in high temperatures or 

direct sunlight.

●

  Do not let the remote control fall onto the floor, where it 

may become jammed under the brake or accelerator pedal.

4  Receive notices of software upgrades and software updates.

●

  Do not expose the LCD screen to direct sunlight when this 

product is not used. This may result in LCD screen malfunc-

tion due to the resulting high temperatures.

●

  When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption 

of the video in the form of spots, colored stripes, etc.

●

  To protect the LCD screen from damage, be sure to touch the 

touch panel keys only with your finger and do so gently.

●

  Some of the settings and recorded contents will not be reset.

The information is erased by disconnecting the yellow lead from 

the battery (or removing the battery itself).

●

  Some of the settings and recorded contents will not be reset.

Pressing the RESET button resets settings and recorded 
contents to the factory settings.

●

  Do not perform this operation when a device is connected 

to this product.

●

  Some of the settings and recorded contents will not be 

reset.

The microprocessor must be reset under the following 

conditions:

●

  Prior to using this product for the first time after installation.

●

  If this product fails to operate properly.

●

  If there appears to be problems with the operation of the 

system.

●

  If your vehicle position is shown on the map with a signifi-

cant positioning error.

< CRD4878-B >

 
                         7