Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Philips
  4. HTL1170B/F7
  5. オーナーマニュアル

Philips HTL1170B/F7 オーナーマニュアル

ダウンロード
ページ / 20
10 EN
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with 
your Bluetooth device (such as an iPad, iPhone, 
iPod touch, Android phone, or laptop), and then 
you can listen to the audio files stored on the 
device through your SoundBar speakers.
What you need
•  A Bluetooth device which supports 
Bluetooth profile A2DP, and with Bluetooth 
version as 2.1 + EDR.
•  The operational range between the 
SoundBar and a Bluetooth device is 
approximately 10 meters (30 feet).
1 
Press   on the remote control to switch 
the SoundBar to Bluetooth mode.
 
»
The   indicator blinks at a fast rate.
2 
On the Bluetooth device, switch on 
Bluetooth, search for and select Philips 
HTL1170B to start connection (see the 
user manual of the Bluetooth device on 
how to enable Bluetooth).
•  When prompted for a password, enter 
"0000".
 
»
During connection, the   indicator 
blinks at a lower rate.
3 
Wait until the   indicator lights up.
 
»
If the connection fails, the   indicator 
blinks continually at a lower rate.
4 
Select and play audio files or music on 
your Bluetooth device.
•  During play, if a call is coming, music 
play is paused. 
•  If your Bluetooth device supports 
AVRCP profile, on the remote control 
you can press    /   to skip to a track, 
or press 
 to pause/resume play.
5 
To exit Bluetooth, select other source.
•  When your switch back to Bluetooth 
mode, Bluetooth connection remains 
active.
Note
 
•
The music streaming may be interrupted by obstacles 
between the device and SoundBar, such as wall, metallic 
casing that covers the device, or other devices nearby 
that operate in the same frequency.
 
•
If you want to connect your SoundBar with another 
Bluetooth device, press and hold   on the remote 
control to disconnect the currently connected 
Bluetooth device.
Apply factory settings
You can reset your SoundBar to the default 
setting mode.
1 
In mute mode, quickly press AUX two 
times.
 
»
The factory settings is restored.
Update software
To continually improve the product, 
software upgrade may be offered. Visit 
www.philips.com/support to check if the latest 
software version is available.