Frigidaire FPHI2188PF オーナーマニュアル

9

Turning the refrigerator temperature control 

to “0” turns off the compressor and prevents 

the refrigerator from cooling, but does not 

disconnect the power to the light bulb and 

other electrical components. To turn off 

power to your refrigerator, you must unplug 

the power cord from the wall outlet.



When first turning refrigerator on, move

refrigerator and freezer controls to Normal. 

This is the recommended initial setting. After 

24 hours, adjust the controls as needed.

Your ice maker is shipped from the factory

with the wire signal arm in the ON position. 

To ensure proper function for your ice maker, 

hook up water supply immediately or turn ice 

maker OFF by lifting the wire signal arm until 

it clicks and locks in the UP position. If the 

•  Adjust temperature gradually: move the 

knob in small increments, allowing the 

temperature to stabilize.

Turning the refrigerator control will change 

temperatures in both compartments. For 

example, if the refrigerator control is turned to a 

colder setting, the freezer control may have to be 

adjusted to a warmer setting. Turning the freezer 

control will change only the freezer temperature.
To maintain temperatures, a fan circulates air 

in the refrigerator and freezer compartments. 

For good circulation, do not block cold air vents 

with food items.

If your refrigerator has an automatic ice maker, 

no ice will be produced during the first 24 hours

of operation. Air in new plumbing lines may 

cause the ice maker to cycle two or three times 

before making a full tray of ice. With no usage, 

it will take approximately one to two days to fill

the ice container.
New plumbing connections may cause the first

production of ice cubes to be discolored or have 

an odd flavor. Discard ice made during the first

24 hours. 

After the plumbing connections have been 

completed, the water supply valve must be 

opened. Place the ice container under the ice 

maker, pushing it as far back as possible. Lower 

the wire signal arm to its “down” or ON position.

To stop the ice maker, lift the wire signal 

arm until it clicks and locks in the “up” or 

OFF position. The ice maker also turns off 

automatically when the ice container is full.



Automatic ice makers are also optional 

accessories that may be installed in most 

models at any time. Call your local dealer for 

information.

To ensure safe food storage, allow the 

refrigerator to operate with the doors closed 

for at least 8 to 12 hours before loading it with 

food.