WineMate Wine Cooling Unit - 250 Cu. Ft. Wine Cellar インストールガイド

                                                                                                                                             
                                                            

                                

                                                               

 

 
Make an opening in the wine cellar wall as illustrated in Fig. 4-1. The dimensions 
of the opening should be ¼ inch larger than the width and height of the unit. 
Construct a shelf as shown in Fig.4-1. The shelf must be capable of supporting 
the weight of the unit. Place the unit on the shelf with the back of unit flush with 
the outside of the wall. Attach the grille to the outside wall with screws. Seal the 
inside with a high quality weather stripping and cover with molding. Attach the 
molding to the wall not the unit. Plug the unit into a properly grounded and 
dedicated outlet of adequate capacity. 
             
Because of potential safety hazards under a certain condition we strongly 
recommend against the use of an extension cord. However, if you still select to 
use an extension cord, it is absolutely necessary that it is a UL LISTED 3-wire 
grounding type appliance extension cord having a 3-blade grounding plug and a 
3-slot receptacle that will plug into the appliance. The marked rating of the 
extension cord should be 115 V, 15 A. or equivalent and not greater than 15ft in 
length. 

                                                                                               

- 2 -