Electrolux EI23BC35KS オーナーマニュアル

ページ / 49
6
Installation
This Use & Care Guide provides general 
installation and operating instructions for 
your model. We recommend using a service 
or kitchen contracting professional to install 
your refrigerator. Use the refrigerator only as 
instructed in this Use & Care Guide. 
Before 
starting the refrigerator, follow these 
important first steps.
Location
•  Choose a place that is near a grounded, 
non-GFCI, electrical outlet. Do Not use 
an extension cord or an adapter plug.
•  If possible, place the refrigerator out of 
direct sunlight and away from the range, 
dishwasher, or other heat sources.
•  The refrigerator must be installed on a 
floor that is level and strong enough to 
support a fully loaded refrigerator.
•  Consider water supply availability for 
models equipped with an automatic ice 
maker.
Installation
•  Allow the following clearances for ease 
of installation, proper air circulation, and 
plumbing and electrical connections:
 
Sides & Top  ⅜ inch (9.5 mm)
 
Back 
1 inch (25.4 mm)
Door opening
Your refrigerator should be positioned to allow 
easy access to a counter when removing 
food. For best use of refrigerator drawers and 
freezer baskets, the refrigerator should be in a 
position where both can be fully opened.
CAUTION
DO NOT install the refrigerator where the 
temperature will drop below 55°F (13°C) or 
rise above 110°F (43°C). The compressor 
will not be able to maintain proper 
temperatures inside the refrigerator.
DO NOT block the toe grille on the lower 
front of your refrigerator. Sufficient air 
circulation is essential for the proper 
operation of your refrigerator.
NOTE
If your refrigerator is placed with the door 
hinge against a wall, you may have to 
allow additional space so the door can be 
opened wider.
NOTE
The refrigerator doors are designed to shut 
by themselves within a 20-degree opening.
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
Top
Hinge
Screw
Components Provided:
Required Tools
You will need the following tools:
Adjustable 
Wrench
3/8" Fixed 
Wrench
Phillips Head
or
#2 Square
Drive Head
(OR)
Tools Necessary:
Socket 
Wrench Set
and
or
or