Electrolux E23BC78IPS オーナーマニュアル

ページ / 35
6
This Use & Care Guide provides general installation 
and operating instructions for your model. We 
recommend using a service or kitchen contracting 
professional to install your refrigerator. Use the 
refrigerator only as instructed in this Use & Care 
Guide. 
Before starting the refrigerator, follow these 
important first steps.
Location
 •  Choose a place that is near a grounded, non-
GFCI, electrical outlet. 
Do Not use an extension 
cord or an adapter plug.
 •  If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher, or 
other heat sources.
 •  The refrigerator must be installed on a floor that
is level and strong enough to support a fully 
loaded refrigerator.
 •  Consider water supply availability for models
equipped with an automatic ice maker.
Installation
 •  Allow the following clearances for ease of
installation, proper air circulation, and plumbing 
and electrical connections:
 
Sides & Top 
³⁄₈
 inch (9.5 mm)
 
Back 
 
1 inch (25.4 mm)
Door opening
Installation
Your refrigerator should be positioned to allow easy 
access to a counter when removing food. For best 
use of refrigerator drawers and freezer baskets, the 
refrigerator should be in a position where both can be 
fully opened.
Guidelines for final positioning 
of your refrigerator
 •  All four corners of the cabinet must rest firmly on
the floor.
 •  The cabinet should be level at the front and rear.
 •  The sides should tilt ¼ inch (6 mm) from front
to back (to ensure that doors close and seal 
properly).
 •  Doors should align with each other and be level.
CAUTION
DO NOT install the refrigerator where the temperature 
will drop below 55°F (13°C) or rise above 110°F 
(43°C). The compressor will not be able to maintain 
proper temperatures inside the refrigerator.
DO NOT block the toe grille on the lower front of your 
refrigerator. Sufficient air circulation is essential for 
the proper operation of your refrigerator.
NOTE
If your refrigerator is placed with the door hinge 
against a wall, you may have to allow additional space 
so the door can be opened wider.
Tools Necessary:
Phillips
TM
 Head
or
#2 Square Drive
Head
(OR)
AND
OR
OR
OR
Socket
Wrench Set
Adjustable
Wrench
3/8” Fixed
Wrench
1/4” Nut
Driver
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
Top
Hinge
Screw
Components Provided:
Required Tools
You will need the following tools: