Electrolux E40PV100FS オーナーマニュアル

WARNING

•   Read all instructions before using this appliance.
•   Install or locate this appliance only in accordance with these installation instructions.
•   Do not operate this appliance if it has a damaged electrical conduit or wires, if it is not

working properly or if it has been damaged or dropped.

• To reduce the risk of ﬁre, electric shock, or injury to persons, observe the following:

a) Installation work and electrical wiring must be done by qualiﬁed person(s)

in accordance with all applicable codes and standards, including ﬁre-rated

construction.

b) Sufﬁcient air is needed for proper combustion and exhausting of gases through

the ﬂue (chimney) of fuel burning equipment to prevent back drafting. Follow the

heating equipment manufacturer’s guidelines and safety standards such as those

published by the National Fire Protection Association (NFPA), and the American

Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and

the local code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical wiring and

other hidden utilities.

d) Ducted fans must always be vented outdoors.
e) Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer.

f) Before servicing or cleaning unit, switch power off at service panel and lock

the service disconnecting means to prevent power from being switched on

accidentally. When the service disconnecting means cannot be locked, securely

fasten a prominent warning device, such as a tag, to the service panel.

• To reduce the risk of ﬁre, use only metal ductwork.
• Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for the

electric current. This appliance is equipped with a cord having a grounding wire

with a grounding plug. The plug must be plugged into an outlet this is properly

installed and grounded.

• Improper grounding can result in a risk of electric shock.
• Consult a qualiﬁed electrician if the grounding instructions are not completely

understood, or if doubt exists as to whether the appliance is properly grounded.

• Do not use this unit with any separate solid-state speed control device.

Safety

SAFETY PRECAUTIONS