Electrolux EW26SS85KS オーナーマニュアル

  1  Remove handles from carton and any other 

protective packaging.

  2  Position freezer handle end caps over upper 

and lower pre-installed shoulder bolts (A) that 

are fastened into door, ensuring the holes 

for the set screws are facing towards the 

refrigerator door.

  3  While holding handle firmly against door, fasten 

upper and lower Allen set screws (B) with 

supplied Allen wrench.

  4  Repeat steps 2 and 3 to install refrigerator 

handle. Ensure the holes for the set screws are facing towards the freezer door.

Ensure handle set screws are facing

each other with doors closed

Freezer Lower End Cap

Refrigerator Lower End Cap

Freezer Upper End Cap

Refrigerator Upper End Cap

All set screws should be tightened and sub-flush (Allen set screw should be seated just below 

the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer 

and refrigerator doors with no gaps.