Electrolux E30EW75PPS オーナーマニュアル
10
Setting Oven Controls
Wave-Touch™ Display Modes
Sleep mode
When not in use, the control panel display will only show the
clock.
clock.
Awake mode
Touch the control panel to show available controls. If the panel
is not touched again within 2 minutes the control will return to
the sleep mode.
is not touched again within 2 minutes the control will return to
the sleep mode.
User Preferences
The user pref key controls options for preferences.
The display shows a digital abbreviation and value for
every preference each time the user pref key is
pressed.
The display shows a digital abbreviation and value for
every preference each time the user pref key is
pressed.
IMPORTANT! Please read the following instructions
before setting the clock or changing the user prefer-
ences functions:
before setting the clock or changing the user prefer-
ences functions:
•
User preferences cannot be changed when any oven
function or timer is active.
function or timer is active.
•
Press and continue to press user pref to navigate through
the preferences.
the preferences.
•
Press hi + or lo - to toggle between options for each prefer-
ence.
ence.
•
Continue to press hi + or lo - to increase or decrease
numeric values. You may also use the numeric keys to
input precise values. However, when adjusting the oven
temperature settings use the hi or lo keys as described in
numeric values. You may also use the numeric keys to
input precise values. However, when adjusting the oven
temperature settings use the hi or lo keys as described in
•
Press
START
to accept a new option entry or press user
pref to advance to the next preference.
•
Press
CANCEL
to exit the preferences mode.
Setting the Clock
When the appliance is powered up for the first time or when the
electric supply to the appliance has been interrupted, the dis-
play will flash 12:00. Press CANCEL. This will automatically set
the clock at 12:00.
electric supply to the appliance has been interrupted, the dis-
play will flash 12:00. Press CANCEL. This will automatically set
the clock at 12:00.
To set the clock for 1:30 (as an example of setting correct
time of day):
time of day):
•
Be sure to set the clock to the correct time of day before
using the oven, especially when cooking with added time
instructions.
using the oven, especially when cooking with added time
instructions.
•
The clock cannot be adjusted while the oven is cooking, the
timer is active, or during a clean.
timer is active, or during a clean.
•
If an invalid time of day is entered, the control will sound
with a triple beep (error tone). Re-enter a valid time of day
and press START. If CANCEL is pressed the clock will
automatically set for 12:00.
with a triple beep (error tone). Re-enter a valid time of day
and press START. If CANCEL is pressed the clock will
automatically set for 12:00.
To set the clock to another time (as an example of changing
for Daylight Savings Times):
for Daylight Savings Times):
1.
Press the user preference key
until CLO appears in
the display.
2.
Use numeric keys or
hi +
or
lo-
keys to set the correct time
of day and press START.
Figure 8:
Touch panel to see available oven controls
1.
Press user pref until CLO appears in
the display.
the display.
2.
Enter
130
using numeric keys.
130
3.
Press START to accept.
4.
Press CANCEL to return to program-
ming mode.
ming mode.