Electrolux E24WC75HPS オーナーマニュアル
9
Door Reversal
Reversing the Door
This model comes equipped with a RH-swing door.
To convert the unit to a LH-swing door (as shown
in the Use & Care Guide), certain components
must be obtained before beginning the conversion.
These components are available from your local
dealer or by calling Electrolux.
To convert the unit to a LH-swing door (as shown
in the Use & Care Guide), certain components
must be obtained before beginning the conversion.
These components are available from your local
dealer or by calling Electrolux.
Order Part Number: 5303918377
To reverse the door:
1 Disconnect power to the wine cooler.
2 Remove toe grille by removing two (2)
screws.
3 Disconnect door harness from connector
bracket behind lower front panel. Pull
harness from behind lower front panel so it is
hanging below the door.
harness from behind lower front panel so it is
hanging below the door.
4 Remove upper right-hand (RH) hinge bracket
by loosening four (4) screws. Be careful
to support the door while loosening and
removing the upper hinge bracket.
to support the door while loosening and
removing the upper hinge bracket.
5 Lift the door off of the lower RH hinge
bracket. Turn the door upside down and
place on a soft, non-abrasive surface.
place on a soft, non-abrasive surface.