Electrolux E15IM60GPS オーナーマニュアル

Installation

If a gravity drain connection is not available, we 
strongly recommend the use of the Electrolux 
EIMP60 drain pump. The Electrolux EIMP60 
drain pump is available through your Dealer, or 
direct from Electrolux with complete installation 
instructions. If a pump other than the Electrolux 
EIMP60 drain pump is to be used, it must meet the 
following specifications:

•     It must be UL listed and have a UL listed, 

120 VAC, 3-wire grounded power cord.

•     It must have overall maximum outside 

dimensions of 8-3/4” wide x 5-3/4” deep x 
7-3/4” high.

•     It must have a minimum flow rate of 15 

gallons per hour at 10 feet of lift.

•     It must have a sealed sump which does not 

allow water leakage in the case of a power 
outage, restricted drain or pump failure.

•     It must have a check valve in the discharge 

line to prevent waste water return to the 
pump.

•     It must have an overflow protection control 

which will shut off power to the ice maker in 
the event of a pump failure.

•     It must have an operating temperature range 

of 50°F to 110°F (10°C to 43°C).