Electrolux E36GC75PSS オーナーマニュアル

Your appliance is shipped with the burner heads 

and burner caps in the correct locations. Before

using your gas appliance be sure to:
● Follow installation instructions before operating.

● Remove all packing tape from cooktop area.

● To avoid possible burns use care when 

cleaning the cooktop. 

DO NOT attempt to clean 

the cooktop whenever the cooktop or burner 

heads are still hot.

● To avoid possible burns DO NOT attempt any 

of the following cleaning instructions provided 

before turning OFF all of the surface burners

and allow them to cool.

● To avoid possible burns DO NOT attempt to 

operate the surface burners without the burner 

caps.

Should you ever need to remove the burner caps 

for cleaning lift the burner cap off the burner 

head. Clean heavy soils with an absorbent cloth. 

Rinse with a clean, damp cloth and immediately 

thoroughly dry including the bottom and inside 

of the cap. Do not use harsh abrasive cleaners.

They can scratch the porcelain on the cap. Do not

clean burner caps in dishwasher. When placing the 

burner caps, see Important note below.

 

When placing the burner caps on the cooktop, be 

sure the burner caps are seated firmly on top of 

burner heads. Improper flame size and uneven

heating may result when any surface burners are 

turned ON and the burner caps are not seated

correctly.

Lift the burner cap from the burner head. The

surface burner heads are secured to the cooktop 

and 

For proper gas flow it may be necessary to clean

the burner heads and slots. To clean, first use a

clean DAMP cloth to soak up any spills. Remove

any food from between the burner slots using a 

small nonabrasive brush like a toothbrush and 

afterwards wipe using a damp cloth. For stubborn 

soils located in the slots, use a small-gauge wire or 

needle to clean.

Slots

Ignition port

Orifice port

Should you experience ignition problems it may be 

that an ignition port hole is partially blocked with 

soil (see figure below). With the burner head in

place, use a small wire gauge needle or the end of 

a paper clip to clear the ignition port or ports.

Prior to using your cooktop for the first time, apply

a ceramic cooktop cleaning cream (available in

most hardware, grocery and department stores) to

the ceramic surface. Clean and buff with a clean 

paper towel. This will make cleaning easier when 

soiled from cooking. Cooktop cleaning creams 

leave a protective finish on the glass to help

prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on 

the cooktop glass can cause metal markings on the 

cooktop surface. These marks should be removed 

immediately after the cooktop has cooled using the 

cooktop cleaning cream. Metal marks can become

permanent if not removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with

rough bottoms can mark or scratch the cooktop 

surface. 

Do not slide anything metal or glass 

across the cooktop. 

Do not use your cooktop as a 

cutting board or work surface in the kitchen. 

Do not 

cook foods directly on the cooktop surface without a 

pan. 

Do not drop heavy or hard objects on the glass

cooktop, they may cause it to crack.