Electrolux E32AR75JPS オーナーマニュアル

If door must be removed:

•     Unplug the unit or switch the breaker that supplies  

power to the unit to the off position.

•   Remove the plastic top hinge cover.
•   Hold the door in place while removing the top 

hinge from the cabinet. 

•   Remove the two 3/8” hex head bolts from the top 

hinge with a 3/8” wrench or socket.

•   Lift the door upwards and pull up and away from 

the cabinet until free of the bottom hinge pin 
mounted on the front of the cabinet.

•   To replace the door, reverse the above procedures 

and securely tighten all screws to prevent hinge 
slippage.

For safe food storage, allow four (4) hours for refrigerator to cool down completely.  The refrigerator will run 
continuously for the fi rst several hours.

The 

Custom Set™ Electronic Control

 is located inside the refrigerator.  Temperature is factory preset to provide 

satisfactory food storage temperatures.  However, the temperature control is adjustable to provide a range of 
temperatures for your personal satisfaction.  

To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN (-) key for colder 
temperature on the control panel.  Allow several hours for the temperature to stabilize between adjustments.  
The refrigerator can be adjusted between 33°F (1°C) and 46°F (8°C).  By pressing the TEMP MODE key, the 
temperature display will toggle between °F to °C.  

To turn the refrigerator OFF, press the UP (+) key until the warmest temperature setting of 46ºF (8ºC) shows 
in the display.  Then press the UP (+) key three (3) times within three (3) seconds to turn the refrigerator OFF.  
The display will then scroll “OFF” across the display.   To turn the unit back ON, press the DOWN key three (3) 
times within three (3) seconds.  The control will then display “46ºF (8ºC)” and may be adjusted to the desired 
temperature.