Electrolux EW30IS65JS オーナーマニュアル

Figure 1

For many foods, especially roasts and poultry, testing the internal temperature is the best 
method to insure properly cooked food. The Temperature Probe gets the exact temperature 
you desire without having to guess. This feature can be used with Bake, Convection Bake, 
Convection Roast and Perfect Turkey cooking modes. The oven can be programmed for 
Probe at any temperature between 130°F to 210°F with a default temperature of 170°F. This 
unit is equipped with one temperature probe entry in the upper oven.

1.   Use only the probe supplied with your appliance; any other may result in damage to the 

probe or the appliance.

2.  Handle the Temperature Probe carefully when inserting and removing it from the food and outlet.
3.  Do not use tongs to pull the cable when inserting or removing the Probe. It could damage the Probe.
4.  Defrost your food completely before inserting the Probe to avoid breaking it.
5.  Never leave or store the Temperature Probe inside the oven when not in use.
6.  To prevent the possibility of burns, carefully unplug the Temperature Probe using hot 

pads.

1.  Always insert the probe so that the tip rests in the center of 

the thickest part of the meat. Do not allow probe to touch 
bone, fat, gristle or pan.

2.  For bone-in ham or lamb, insert the Probe into the center of 

the lowest large muscle or joint. For dishes such as meat loaf or 
casseroles, insert the Probe into the center of the food. When cooking fi sh, 
insert the Probe from just above the gill into the meatiest area, parallel to the backbone.

3.  For whole poultry (chicken, turkey, etc.), insert the probe into the thickest part of the inner 

thigh from below and parallel to the leg (see fi gure 1).

1.  Insert the Temperature Probe into the food (see Proper Temperature Probe Placement above).

2.  Plug the Temperature Probe into its outlet in the oven. (The outlet is located on the top 

left hand side of the cavity wall, near front of the oven). Always insert the probe into 

a cool oven. Make sure it is pushed all the way into the outlet. Close the oven door.

3.  Select oven by pressing either UPPER OVEN 

4.  Select a cooking mode. A target temperature must be set to trigger the buzzer when the food 

reaches the set temperature. Press COOK OPTIONS

 

 to bring up the cook options items 

and press PROBE 

 pad to enter the temperature. Adjust temperature to the desired setting 

using the numeric pads or just press START

 to use the default target temperature of 

170°F. The pads 

 or 

 can also be pressed to raise or lower the temperature. The target 

temperature setting will be accepted after the START

 pad is pressed.

5.  At any time during the cooking, the PROBE 

 pad can be pressed once to display the 

actual meat temperature or pressed twice to display the target temperature. When on 

the target temperature display, a new temperature can be entered. After 5-8 seconds, 

the display will go back to showing the oven temperature.

6.  When the food reach the target temperature, the oven will go into a KEEP WARM mode 

until you press CANCEL