Electrolux E23CS78HPS オーナーマニュアル

ページ / 34
13
Controls & Settings
What To Do If The Temperature Displays 
Flash
If ever you see both temperature displays 
continuously flashing, it may indicate that the control 
system has detected a performance problem. Call 
your Electrolux service representative, who can 
interpret the flashing message.
Turning The Cooling System On And 
Off
You can disable the cooling system in your 
refrigerator by pressing the On/Off button located 
on the left side of the temperature control panel. 
To ensure that you do not accidentally turn off the 
cooling system, the button does not work unless 
you press and hold it for three seconds.
Once you disable the cooling system, all 
refrigeration to the freezer and fresh food 
compartments stops.
Cooling System On/Off Button
To turn the cooling system back on, you must again press and hold the On/Off button for three more 
seconds.
Responding to Alarms (Audible Tones & Indicator Lights)
Your refrigerator’s control system can convey the following information through audible tones and the
alarm indicator lights.
IMPORTANT
The On/Off button only controls your refrigerator’s
cooling system. Power to lights and other 
electrical components continues unless you 
unplug the power cord.
Alarm 
Name
Indicator 
Light
Audible 
Tones
Condition
How to Respond
On
(light is off)
Alarm system is not active 
while Freezer and Fresh Food 
compartments are cooling to-
ward the current temperature 
settings.
If Freezer and Fresh Food com-
partments do not match your 
temperature settings in three 
hours, expect the control system 
to signal other conditions. 
If cooling down does not stabilize 
toward your current settings, call 
1-877-435-3267 for assistance.
On
Steady 
Green
Alarm system is active.
No response required.
Door Ajar
Flashing 
Green
Freezer or Fresh Food door 
has been open for over five 
minutes.
Close door to disable and reset 
alarm.
High Temp
Flashing 
Amber
Freezer or Fresh Food com-
partment has been too warm 
(45
F or higher) for over an 
hour.
Press Alarm Reset button to turn 
off alarm. If temperatures do not 
improve call 1-877-435-3267 for 
assistance.
Power 
Failure
Flashing 
Amber
A power outage was detected. Press Alarm Reset button to 
turn off alarm and again to reset. 
Check if the power failure lasted 
long enough to affect stored food 
temperatures.