Electrolux E30MC75JPS オーナーマニュアル

• 

Do not close the oven door until all the interior 
oven racks are fully inserted and retracted to 
the back of the oven.

• 

Do not hit the glass with pots, pans, or any 
other object. The oven door glass may break or 
even break at a later time unexpectedly.

• 

Scratching, hitting, jarring or stressing the oven 
door glass may weaken its structure causing 
an increased risk of breakage at a later time.

• 

You may use a glass cleaner on the outside 
of the oven door glass. Do not spray or allow 
water or the cleaner to enter or drip down into 
the oven door vents. Spray cleaner on cloth 
fi rst and then wipe the oven door clean.

• 

Do not use strong oven cleaners, powders or 
any harsh abrasive cleaning materials on the 
outside of the oven door or glass.

• 

Never clean the oven door gasket. The oven 
door gasket should always clean during the 
Self-clean cycle.

Most oven doors contain glass that can 
break. Read the following recommendations:

•  Be sure the appliance is unplugged and all 

parts are COOL before replacing  oven light. 
Wear a leather-faced glove for protection 
against possible broken glass or burns.

The lower oven light bulbs are located on both 
side of the oven cavity and both are covered with 
a glass shield. The glass shield must be in place 
whenever the oven is in use.

1.  Turn electrical power off at the main source or 

unplug the appliance.

2.  Remove lower oven interior light shield as 

illustrated below.

3.  Replace bulb with a new T-4 type 40 Watt 

Halogen appliance bulb. Please note: do not 
allow your fi ngers to touch the new bulb when 
replacing. This will shorten the life of the new 
bulb. Use a paper towel to cover the new bulb 
when installing.

4.  Replace glass shield over bulb.

5.  Turn power back on again at the main source 

(or plug the appliance back in).

6.  The clock will then need to be reset.