Electrolux E30MC75JPS オーナーマニュアル

ページ / 76
Before you call
Problem Solution
Soil not completely removed after 
self-cleaning cycle is completed
•  Failure to clean bottom, from top of oven, frame of 
oven or door area outside oven seal. These areas 
are not in the self-cleaning area, but get hot enough 
to burn on residue. Clean these areas before the 
self-cleaning cycle is started. Burned on residue can 
be cleaned with a stiff nylon brush and water or a 
nylon scrubber. Be careful not to damage the oven 
gasket.
•  Excessive spillovers in oven. Set the self-clean cycle 
for longer cleaning time.
Oven smokes excessively during 
broiling
•  Control not set properly. Follow broiling instructions 
under Setting Oven Controls.
•  Meat too close to the broil element. Reposition the 
broil rack to provide proper clearance between the 
meat & the element. Preheat the broil element for 
searing.  
•  Meat not properly prepared. Remove excess fat from 
meat. Cut remaining fatty edges to prevent curling, 
but do not cut into lean. 
•  Insert on broiler pan wrong side up & grease not 
draining. Always place grid on the broiler pan with 
ribs up & slots down to allow grease to drip into pan 
(some models).
•  Grease has built up on oven surfaces. Regular 
cleaning is necessary when broiling frequently. Old 
grease or food spatters cause excessive smoking.
Oven control panel beeps & 
displays any F code error (for 
example F10, F11, F13, F14, F15, 
F20, F23, F25, F30, F31 or F90)
•  Oven control has detected a fault or error condition. 
Press CANCEL to clear the display & stop beeping. 
Try the bake or broil feature again. If the F code error 
repeats, remove power supply to appliance, wait 
5 minutes and then repower the appliance and set 
clock for the time of day. Try the bake or broil feature 
again. If the fault recurs, record fault and call for 
service. 
Poor baking results
•  Many factors affect baking results. Make sure the 
proper oven rack position is used. Center food in the 
oven and space pans to allow air to circulate. Allow 
the oven to preheat to the set temperature before 
placing food in the oven. Try adjusting the recipe’s 
recommended temperature or baking time. If you 
feel the oven is too hot or cool, see “Adjusting Oven 
Temperature” in the Setting Your Preferences 
section of this Use & Care Guide.
73
Solutions to Common Oven Problems
Questions or for service call: 1-877-4ELECTR
OLUX
 
(1-877-435-3287)