Electrolux EI24ID30QW オーナーマニュアル

ページ / 60
17
Solutions to Common Problems
Glassware/Flatware Spotted or Cloudy
• 
Check water hardness.  For extremely hard 
water, it may be necessary to install a water 
softener. (See Detergent Chart).
• 
Water temperature may be low.  Avoid 
extremely low or high temperatures. (See 
Factors Affecting Performance.
• 
Avoid overloading and improper loading. (See 
Preparing and Loading Dishes).
• 
Use fresh detergent.  Old detergent is 
ineffective.
• 
Make sure rinse aid dispenser is fi lled.
• 
Check to see that proper amount of detergent 
is being used for cycle selected.  Also, check 
phosphate level.  (See Detergent Dispenser.)
• 
Home water pressure may be too low - it 
should be 20 to 120 pounds per square inch 
(psi).
Water in Bottom of Tub
• 
Water left in the tub bottom after the cycle is 
complete is not normal.  If water remains in the 
bottom of the tub, the dishwasher may not be 
draining properly. (See Dishwasher Does not 
Drain Properly).
Dishware Chipped
• 
Load with care and do not overload. (See 
Preparing and Loading Dishes).
• 
Place delicate items in top rack.
• 
Place glasses securely against pins and not 
over pins.
• 
Load items so they are secure and don’t jar 
loose when moving racks in and out.  Move 
racks in and out slowly.
• 
Make sure tall glasses and stemware will clear 
top of tub when rack is pushed in.
Dishware Stained or Discolored
• 
Tea and coffee can stain cups.  Remove the 
stains by hand washing in a solution of 1/2 cup 
(120 ml) bleach and one quart (1L) of warm 
water.  Rinse thoroughly.
• 
Iron deposits in water can cause a yellow or 
brown fi lm.  A special fi lter installed in the 
water supply line will correct this problem. (See 
Removing Spots and Film).
• 
Aluminum utensils can leave gray/black marks 
when they rub against other items.  Load 
Properly.
• 
Certain high acid foods can cause discoloration 
of stainless steel and plastics if allowed to sit 
for a long period.  Use the Rinse Only cycle or 
rinse by hand if not operating dishwasher at 
once.
• 
Mixing stainless steel and silver utensils in 
silverware basket can cause pitting of the 
stainless steel blades.  Avoid mixing stainless 
steel and silver.
Cycle Takes a Long Time
• 
Is cycle in a water heating delay?
• 
Has the delay start option been selected?
• 
Has the sanitize option been selected?
Normal Sounds You Will Hear
• 
Normal sounds include water fi ll, water 
circulation and motor sounds.
Dishwasher Leaks
• 
Use only fresh detergent designed for 
automatic dishwashers.  Measure detergent 
carefully.  Try a different brand.
Etching
• 
Using too much detergent especially in soft or 
softened water causes damage that looks like 
a fi lm but cannot be removed.
• 
Adjust the amount of detergent based on the 
water hardness. (Check Detergent Chart).
• 
Lower the water temperature.