Electrolux EW30ES65GS オーナーマニュアル

ページ / 56
13
Timers
Getting Started
Setting clock at power up
You will be prompted to enter the time of day in the 
event of a power failure or when you first provide
electric power to your appliance.
•  When your appliance is first powered up, 12:00
will flash in the display.
•  Enter the time of day using the numeric key pads
and press 
START to set.
If an invalid time of day is entered, the control will 
triple beep. Re-enter a valid time of day and press 
START. If CANCEL is pressed your clock will start 
with the time set for 
12:00.
Select the user pref key to modify the time of day 
during other situations such as day light savings.
See example below to set the timer for 5 minutes:
Sleep mode
Your control will remain in a sleep mode when not 
in use. Only the clock will display during this mode. 
You will need to wake the control to begin any 
function - fig. 1.
Awake mode
To awake the control touch within the display panel. 
If the control panel is not touched again within 2 
minutes, the control will return to the sleep mode. 
To start cooking you must select either the upper 
oven or the warmer oven. User preferences will be 
available during the awake mode as well as timers, 
oven light and the control lock  - fig. 2.
Sleep mode 
Fig.1
Awake mode 
Fig.2
The two timers provided with the oven control 
serve as extra reminders in the kitchen. When a 
timer reaches less than 1 hour, the display will start 
to count down in minutes and seconds. When the 
time runs out the active timer will beep, “
0:00” will 
flash.
The following time settings apply to the timers:
•  Min. time: 1 minute
•  Max. time: 11 hours 59 minutes
To cancel after setting the timer, press the TIMER
key again.
Wave-Touch™ display modes
Example
Step
    
Press
1.  Press
 TIMER
   
2.  Enter
 5 minutes
   
3.  Press
 TIMER
   
 
NOTE
The timer(s) will not affect the cooking process.