Electrolux EP19WI30LS オーナーマニュアル
14
How to Use
Flow Meter Alarm
3
2,3
1
2
Set temperature.
Press the Power
On/Off Button
On/Off Button
Plug the bath drain.
Preparation
(Starting with the power off)
Always check
temperature setting
before use.
temperature setting
before use.
Hot
Cold
On
The temperature will be displayed
on the remote control thermostat.
on the remote control thermostat.
Previous set temperature (example:110°F)
On
Check the indicator lights.
Water temperature
1
If the flow meter alarm is being used to
indicate when a tub is full:
indicate when a tub is full:
r If any hot water is being used besides
what is going into the tub, the alarm
will sound before the tub is full.
will sound before the tub is full.
r If there was water in the tub before
the fill began, or if the water is not
shut off manually when the alarm
sounds, the tub may overflow.
shut off manually when the alarm
sounds, the tub may overflow.
r If there was water in the tub before
the fill began, the temperature in the
tub after it is full may be different from
the temperature setting.
tub after it is full may be different from
the temperature setting.
On
Check the indicator lights.
Water temperature
Previous set temperature (example:40°C)
When the display
setting is in Celsius.
When the display
setting is in Fahr
enheit.
(
)