Electrolux EN18WI30LS オーナーマニュアル

22

Wipe the outside surface with a wet cloth, then dry the surface.  Use a neutral detergent to clean any stains.
If an external condensate neutralizer is installed, periodic replacement of the neutralizing agent will be required.  
Refer to the instructions supplied with the neutralizer for suggested replacement intervals.

r %POPUVTFCFO[FOF PJMPSGBUUZEFUFSHFOUTUPDMFBOUIFSFNPUFDPOUSPMMFS
  deformation may occur.
r 5IFSFNPUFDPOUSPMMFSJTXBUFSSFTJTUBOUCVUOPUXBUFSQSPPG,FFQJUBTESZBTQPTTJCMF

Wipe the surface with a wet cloth.

To prevent burns or scalding, turn off the power 
button and wait until the equipment cools before 
performing maintenance.

Be sure to do.

For laundry, newspaper, 
timber, oil, spray cans 
and other combustible 
materials near the heater 
or the exhaust vent 
terminal.

For abnormal sounds 
during operation.

For abnormalities in 
external appearance, 
discoloration or flaws.

For water leaks from the 
equipment and piping.

For dust and soot in 
the exhaust vent or 
exhaust vent terminal.

For proper operation of 
pressure relief valve.

(Ex. EN18WI30LS)

For blockage at the 
drain pipe discharge.

For smear or blockage 
with dust, oil, etc. at the 
air supply vent.
If blocked, remove the 
build-up with a vacuum 
cleaner or damp towel.

[When supplying combustion air 
from the indoors]

* Do not permanently remove the Inlet Screen.

air supply vent