Electrolux UL15IM20RS オーナーマニュアル

15

Turning the ice machine “OFF” will only 

terminate the ice production, it does 

not remove power from the appliance. 

Always unplug the power cord from the 

wall outlet before servicing the unit.

The “LOCK” icon is the only active key in this 

mode. If other icons are pressed while in the 

lock mode the “LOCK” icon will flash 3 times, 

and an audible tone will sound, to remind the 

user the appliance is in the lock mode.

Plug the ice machine into a 115 

volt wall outlet, Your appliance is 

shipped from the factory in the "ICE" mode 

and will automatically begin making ice as 

soon as power is supplied to the unit. If 

the appliance does not start, confirm the 

wall outlet has power, and the control is 

in the "ICE" mode (Options section). Do 

not start the ice machine in "ECO" mode. 

"ECO" mode should only be used after 

there is a full bin of ice.

If your appliance is on, "ICE" will be 

displayed. To turn the appliance off, 

push and hold the "ON/OFF" icon for 3 

seconds. The display will show "OFF". 

The drain pump and the interior light 

will still be functioning during the 

OFF mode. To turn the appliance 

back on, press and hold the "ON/OFF" 

icon for 3 seconds, the display will 

show "ICE".

The user interface can be locked to avoid 

unintentional changes from things like 

cleaning. To lock the appliance, push and 

hold the "LOCK" icon for 5 seconds. The 

"LOCK" icon will flash 3 times, then change to 

steady back-lit. To unlock the user interface, 

press and hold the "LOCK" icon for 5 

seconds, and the back-light will turn off.

Your ice machine is equipped with a delay 

start function. This feature can be used to 

temporarily shut the appliance off for 1, 4, 

6, or 8 hours or days. Upon completion of 

the selected delay period, the appliance will 

resume operation. This is ideal for temporarily 

stopping ice machine noises or to save water 

and electricity if you are away from home but 

want fresh ice upon your return. 

A "CLEAN" reminder will occur 

every 6 months to remind you that 

it may be time to clean your appliance. 

Over time mineral build up on the cold 

evaporator plate can occur which can 

adversely affect the quality of your ice. 

This build-up is dependent on your 

water source. Normal ice production will 

continue while the "CLEAN" reminder is 

displayed. You may clear the "CLEAN" 

reminder at any time by momentarily 

pressing the "ON/OFF" icon. When 

reset, the "CLEAN" reminder will reset 

and not occur for another 6 months. If you 

choose to clean the appliance at this time, 

see the Options Menu section.

hours

days

Hours or days timer is set for

Hours or days will be lit

When lit, this signifies the delay start/vacation mode 

is operational

hours

days

To enter the delay start mode, press the 

“CLOCK” icon while the appliance is in 

“ICE” mode. This will delay the next harvest 

by the time displayed. Each additional 

press of the “CLOCK” icon will add 

time, from 1, 4, 6, or 8 hours, to 1, 4, 6, or 

8 days. The next press after 8 

days will leave delay set mode. 

After the desired time has been determined, 

press the “ON/OFF” icon for 2 seconds 

to accept, your unit will shut off and a 

clock icon and your selected time will be 

displayed. When the selected time has 

elapsed, normal ice production will resume.
To cancel the delayed start, press and 

hold the "ON/OFF" icon until the appliance 

enters OFF, then press and 

hold the "ON/OFF" icon again 

until the appliance enters "ICE" 

mode. You can also cancel 

by pressing and holding the "CLOCK" icon 

until it reverts back to "ICE" mode.

If in delay mode, the delay function must first 

be cancelled to enable the ON/OFF function.