Electrolux UL15IM20RS オーナーマニュアル

7

24"

(61cm)

21 3/4"

(55.2cm)

Water

Valve

5"

(12.7cm)

33 5/8"

(85.4cm)

Adjustable

to 34 3/4"

(88.3cm)

Water

Drain

Water

Outlet

14 7/8"

(37.8cm)

Figure 3

This pump is designed to remove drain water from ice machines installed in areas without 

direct drainage access. The sealed reservoir pump collects the melted ice water and pumps 

it to a maximum lift of eight feet (2.44 meters) through 3⁄8” I.D. vinyl tubing to a drain.
The discharge tubing is coiled up and attached to the back of the ice machine. The 3⁄8 

inch I.D. tubing needs to be plumbed and connected to a sanitary sewer (Figure 4).

This drain pump is designed to be 

installed in Electrolux ice machines 

only and has been evaluated for use 

with water only. Drain line vertical rise 

is not to exceed 8 feet and total drain 

line length is not to exceed 20 feet; 

otherwise, the ice machine may not 

operate correctly.

Electrical Shock Hazard
Risk of electrical shock or personal injury 

could occur due to moving components, 

if the machine compartment access 

cover is removed before unplugging the 

ice machine power cord.

Figure 4

Drain line coiled and

secured to the back of the 

cabinet. Uncoil, route to 

an appropriate drain and 

cut to length.

Drain pump

vent tube. Keep 

this open to assure 

air flows freely as 

water enters the 

pump reservoir.