Electrolux EWMED70JTS オーナーマニュアル

(Mesh bag not included.)

•  Turn the cycle selector knob in either direc-

tion to select the cycle desired. The icon for 
that cycle will be illuminated and if the cycle 
description feature is turned on, the cycle and 
estimated cycle time are displayed on the User 
Interface screen for 5 seconds. Press any key 

Over-drying can cause wrinkles, shrinkage, lint, 
harshness and a build up of static electricity.

Read the important instructions in this section of 
the Use and Care Guide before operating your 
dryer.

To reduce the risk of fi re, electric shock or injury 
to persons, read the IMPORTANT SAFETY 
INSTRUCTIONS in this Use and Care Guide 
before operating your dryer.

•  Dry items of similar fabric, weight and con-

struction in the same load.

•  Separate dark items from light-colored items. 

Separate items that shed lint from those that 
attract lint.

•  Check for stains which may not have been 

removed in washing. Repeat stain removal 
process and wash again before drying. Dryer 
heat may permanently set some stains.

•  Place delicate or small items in a mesh bag.

•  Be sure buckles, buttons and trim are heat-

proof and won’t damage the drum fi nish. Close 
zippers; fasten hooks and Velcro

®

-like fasten-

ers. Tie strings and sashes to prevent snag-
ging and tangling.

•  A clean lint fi lter allows the dryer to operate 

more effi ciently.

•  Load items loosely. The average wet load will 

fi ll the drum 1/3 to 1/2 full. Items need room to 
tumble freely for even drying and less wrinkling.

•  If desired, place a dryer fabric softener sheet on 

top of the load at the beginning of the cycle.

•  To save energy and time and avoid uneven 

drying and wrinkling, do not overload the dryer.

•  When drying large items, dry only two or three 

items at a time. Fill out the load with small and 
medium sized items.

•  For delicate or very small loads, add two or 

three similar items to improve tumbling action.