Electrolux E30IC80ISS オーナーマニュアル

  •  Incorrect power level setting. Adjust the power level setting higher or lower and refer 

to recipe for guidance and adjust accordingly.

  •  Lightweight or warped pans were used. Be sure to use good quality cookware.

  •  Use only flat bottom, evenly balanced medium or heavyweight cookware. Heavy and 

medium weight pans heat evenly. Because lightweight pans heat unevenly, foods may 

burn more easily (See pages 11 to 13 for further information).

  •  Adjust Cooking Zone power level setting until the proper amount of heat is obtained.

  •  Many factors affect cooking results. Adjust the recipe’s recommended power levels or 

cooking times.

  •  Cookware is too lightweight or warped. Use heavier quality cookware so foods being 

prepared may cook more evenly.

"E0"

  •  Induction  Cooktop  main  control  has  detected  a  fault  or  error  condition. Try  turning 

electrical power supply OFF and back ON to cooktop in order to reset Cooktop main 

controls. If fault recurs, record fault number and turn power supply to Cooktop OFF.

cookinG Zone led continuously flasHes F

  •  Induction Cooktop pan detection sensors do not see the correct cookware. Test with a 

magnet to be sure cookware is made with Induction compatible material. 

  •  Cookware has been removed from the Cooking Zone without turning the Cooking Zone 

OFF. Place cookware back on to the Cooking Zone or if finished cooking turn of the 

affected Cooking Zone.

  •  Cookware is not centered over the Cooking Zone properly. Refer to page 12 for correct 

cookware placement.