Electrolux E36IC80ISS 仕様シート
Induction Cooktop
E36IC80ISS
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-877-4electrolux (1-877-435-3287)
•
electroluxicon.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxicon.ca
E36IC80ISS 03/12
© 2012 Electrolux Home Products, Inc.
36" Induction Cooktop Specifications
•
Product Weight – 56 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz,
fused on both sides of line with ground.
fused on both sides of line with ground.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 11.0 / 9.6 kW
•
Amps @ 240 / 208 Volts = 45.8 / 46.2 Amps
•
Recommended Circuit Breaker – 50 Amps
•
Always consult local and national electric codes.
•
Allow 2" space below armored cable opening to clear electrical cable and
allow space for installation of junction box on wall at back of cooktop.
allow space for installation of junction box on wall at back of cooktop.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
unprotected wood or metal overhead cabinetry.
unprotected wood or metal overhead cabinetry.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum
width of appliance.
installed to either side of appliance must be no less than maximum
width of appliance.
•
Allow 24" minimum clearance when bottom of wood or metal overhead
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MSG sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MSG sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
•
Allow 1-1/2" minimum clearance between rear edge of cutout and
nearest combustible surface above countertop.
nearest combustible surface above countertop.
•
Allow 2" minimum clearance from edge of cooktop to nearest
combustible wall on either side of unit.
combustible wall on either side of unit.
•
It is recommended that drawers not be used beneath cooktop.
•
To reduce risk of fire when using overhead cabinetry, install vent hood
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
that projects horizontally a recommended minimum of 5" beyond
bottom of cabinets.
•
Induction Drop-In Cooktop model E36IC80ISS is approved to be
used over any Electrolux ICON
used over any Electrolux ICON
®
Single Wall Oven. (Refer to Electric
Cooktop Installation Over 30" Electric Single Wall Oven Specifications
page on web.)
page on web.)
•
Induction Drop-In Cooktop model E36IC80ISS is approved to be
used in combination with an Electrolux ICON
used in combination with an Electrolux ICON
®
36" Downdraft Vent.
(Refer to Drop-In Cooktop / Downdraft Vent Countertop Preparation
page on web for detailed installation specifications.)
page on web for detailed installation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
•
Granite Countertop Installation Kit – (PN # 903061-9010).
10"
12"